V150-4.5 MW™

4 MW brochure

The V150-4.5 MW™ is designed for low wind sites, and is one of  the industry’s highest producing onshore low wind turbines.

V150-4.5 MW™ at a glance

Building on the commercial success of the V150-4.2 MW™ for low wind conditions, the V150-4.5 MW™ captures higher park Annual Energy Production with an expanded global applicability. 

Where permits allow, the higher rating variant delivers an over 3 percent increase in annual energy production compared to the V150-4.2 MW™, while maintaining the same application space and noise level.

Options 
available for the 
V150-4.5 MW™

  • 4.5 MW Power Mode
  • Condition Monitoring System
  • Service Personnel Lift
  • Vestas Anti-Icing System™
  • Vestas Ice Detection 
Learn more about the available options and solutions
  • Fire Suppression 
  • Vestas Shadow Flicker Control System
  • Vestas Bat Protection System 
  • Aviation Lights 
  • Aviation Markings on the Blades 
  • Vestas InteliLight®

Technical specifications

POWER REGULATION OPERATIONAL DATA
Pitch regulated with variable speed
Rated power
4,500kW
Cut-in wind speed
3m/s
Cut-out wind speed
24,5m/s
Re cut-in wind speed
22,5m/s
Wind class
IEC S
Standard operating temperature range
from -30°C* to +45°C with de-rating above 23°C
SOUND POWER
Maximum
105.0 dB(A) Sound Optimised modes dependent on site and country
ROTOR
Rotor diameter
150m
Swept area
17,671m2
Aerodynamic brake
full blade feathering with 3 pitch cylinders
NACELLE DIMENSIONS
Height for transport
3.5 m
Height installed (incl. CoolerTop®)
8.4 m
Length
12.96 m
Width
3.98 m
ELECTRICAL
Frequency
50/60 Hz
Converter
full scale
GEARBOX
Type
two planetary stages and one helical stage
TOWER
Hub heights
Site and country specific
HUB DIMENSIONS
Max. transport height
3.5m
Max. transport width
3.7m
Max. transport length
5.5m
BLADE DIMENSIONS
Length
73.7m
Max. chord
4.2m
Max. weight per unit for transportation
70 metric tonnes
SUSTAINABILITY METRICS PENDING

4 MW

The Vestas 4 MW platform sets new standards for onshore wind performance within regimes ranging from very strong wind and typhoon conditions to ultra low wind.

IEC S

The V150-4.5 MW™ IEC S is designed for low-wind sites.

+61 GW

The performance and versatility of the 4 MW platform has been proven with more than 61 GW installed in 57 countries since 2010.

Related wind turbines

V162-6.2 MW™

With a swept area of over 20,000m², the V162-6.2 MW™ applies the largest rotor size in the Vestas portfolio to achieve industry-leading energy production paired with a high capacity factor.

V150-6.0 MW™

The V150-6.0 MW™ lifts the larger rotor introduced with V150-4.2 MW™ into stronger wind speeds. Combined with its higher generator rating, it increases the production potential at turbine level by more than 20 percent compared to V150-4.2 MW™ in medium wind speed conditions.

V150-4.2 MW™

With the V150-4.2 MW™ Vestas leads onshore wind power to new heights. It has a wind turbine blade size of 73.7 meters and a wind turbine height of 150 meters.